logo
Contáctenos

Persona de Contacto : Sally Mao

Número de teléfono : 86-755-27374847

WhatsApp : +8618277967574

Free call

A Custom Medium DK4.5 PCB Built On Rogers TMM4: Thick 75mil for Demanding RF and Microwave Applications

November 19, 2026

último caso de la compañía sobre A Custom Medium DK4.5 PCB Built On Rogers TMM4: Thick 75mil for Demanding RF and Microwave Applications

 

Today I'm showcasing a custom PCB built on Rogers TMM4—a thermoset microwave material that combines the benefits of ceramic and PTFE laminates without the specialized processing challenges.

 

This custom PCB was fabricated using Rogers TMM4, a ceramic-filled hydrocarbon thermoset with a dielectric constant of 4.50 at 10 GHz. A thick 75mil (1.905mm) core was specified, resulting in a 2mm finished thickness. With 53 components, 92 vias, and 2 nets, this design is a dense, highly interconnected RF sub-system well-suited for satellite communications, power amplifiers, and patch antennas.

 

Key Takeaways

  1. Material: Rogers TMM4 — ceramic-filled hydrocarbon thermoset (Dk 4.50)
  2. Key Benefit: Thermoset stability, reliable wire-bonding, no specialized PTFE processing
  3. Board Size: 70mm x 110.63mm | Finished Thickness: 2mm
  4. Construction: Double-sided, green solder mask on both sides, no silkscreen
  5. Surface Finish: ENIG
  6. Design: 53 components, 92 vias, 2 nets — a dense, highly interconnected RF circuit
  7. Quality: IPC-Class-2 was met, and 100% electrical testing was performed

 

The Challenge: A Thick, Dense RF Design with Thermoset Reliability

A high-performance RF board was required by our customer for a demanding application. A thick 75mil core was needed for mechanical rigidity or specific electrical characteristics, while the dense component and via count demanded a material with excellent dimensional stability and reliable plated through-holes. Wire-bonding capability was also a consideration.

 


TMM4 was selected, a ceramic-filled hydrocarbon thermoset from Rogers. Here's why it was chosen:

 

Thermoset Stability
Unlike PTFE materials, TMM4 is based on a thermoset resin, so it resists creep and cold flow. Mechanical properties are maintained over time, and dimensional stability is ensured.

 

Reliable Wire-Bonding
The thermoset resin allows for reliable wire-bonding without pad lifting or substrate deformation—a valuable capability for specialized RF assemblies and chip testers.

 

High Plated Through-Hole Reliability
The matched CTE (16 ppm/°K in X/Y axes) ensures reliable plated through-holes through thermal cycling—critical for the 92 vias in this design.

 

No Specialized Processing
TMM4 combines the benefits of ceramic and PTFE laminates without requiring the specialized production techniques common to those materials. All common PWB processes can be used.

 

Thick Core Availability (75mil / 1.905mm)
An unusually thick core was specified and delivered. TMM4 is available in thicknesses ranging from 0.0015 to 0.500 inches, providing exceptional design flexibility.

 

Resistance to Process Chemicals
The material is resistant to process chemicals, reducing damage during fabrication.

 

Low Loss (Df = 0.0020 at 10 GHz)
Minimal signal attenuation was ensured for sensitive RF and microwave circuits.

 

último caso de la compañía sobre A Custom Medium DK4.5 PCB Built On Rogers TMM4: Thick 75mil for Demanding RF and Microwave Applications  0

 

Board Specifications

Feature Specification
Dimensions 70mm x 110.63mm (±0.15mm)
Stackup 35μm Cu / 1.905mm TMM4 / 35μm Cu
Finished Thickness 2mm
Trace/Space 6/9 mils
Min Hole Size 0.5mm
Surface Finish ENIG
Solder Mask Green (both sides)
Silkscreen None
Testing 100% electrical
Standard IPC-Class-2

 

 

Design Statistics

Metric Value
Components 53
Total Pads 87 (51 through-hole, 36 SMT)
Vias 92
Nets 2

 

The 92 vias with a 2-net design indicates a highly interconnected RF sub-system with extensive grounding and shielding structures. The high component count (53) suggests a sophisticated circuit—likely a complex feed network, power amplifier stage, or multi-element antenna system.

 

 

Green Solder Mask (Both Sides)

Both sides were protected with green solder mask—providing component protection while maintaining acceptable RF performance for the target frequency range.

 

No Silkscreen
Silkscreen was omitted to keep the board clean and optimize RF performance.

 

ENIG Surface Finish
ENIG was chosen to deliver a flat, solderable surface with excellent corrosion resistance and wire-bonding capability.

 

75mil Thick Core
The unusually thick core was specified to meet specific mechanical or electrical requirements—potentially for mechanical rigidity, controlled impedance, or antenna performance.

 

Material Properties: The Numbers Behind TMM4

Property Value
Dk @ 10 GHz 4.50 ± 0.045
Df @ 10 GHz 0.002
TCDk 15 ppm/°K
CTE (X/Y/Z) 16/16/21 ppm/°K
Thermal Conductivity 0.7 W/mK
Decomposition Temperature 425°C (TGA)
Moisture Absorption 0.07%–0.18%
Thickness Range 0.0015–0.500 inches

 

Why This Matters: TMM4 offers a tightly controlled Dk (±0.045), low loss, and thermoset stability in a material that can be specified in unusually thick cores. The matched CTE ensures reliable plated through-holes through thermal cycling.

 

Comparison: How TMM4 Stacks Up

Property TMM4 TMM6 Standard FR-4
Dk @ 10 GHz 4.5 6 4.0–4.5
Df @ 10 GHz 0.002 0.0023 0.02–0.03
CTE (X/Y) 16 ppm/°K 18 ppm/°K 14–17 ppm/K
Thermal Conductivity 0.7 W/mK 0.72 W/mK 0.3 W/mK
Creep Resistance Excellent Excellent Good
Wire-Bonding Excellent Excellent Limited
Max Thickness 0.500 in 0.500 in Varies

 

Why This Matters: TMM4 offers a lower Dk than TMM6, making it better suited for designs that balance miniaturization with wider trace geometries. Both provide thermoset stability and are available in thick cores.

 

Ideal Applications

With its thermoset stability, reliable wire-bonding, and thick core capability, this design is purpose-built for:

  1. RF and microwave circuitry requiring reliable performance
  2. Power amplifiers and combiners where thermal management matters
  3. Filters and couplers benefiting from precise Dk control
  4. Satellite communication systems where reliability is paramount
  5. GPS and patch antennas requiring precise impedance control
  6. Dielectric polarizers and lenses
  7. Chip testers requiring reliable wire-bonding and consistent performance

 

 

Q: Why was such a thick core (75mil) specified?

A: The thick core may have been specified for mechanical rigidity, controlled impedance, or antenna performance. TMM4 is available in thicknesses up to 0.500 inches, providing exceptional design flexibility.

 

Q: What makes TMM4 different from PTFE materials?
A: TMM4 is a thermoset material, so it resists creep and cold flow—unlike PTFE. It also allows for reliable wire-bonding without pad lifting or substrate deformation.

 

Q: Why was green solder mask applied on both sides?
A: Both sides were protected with green solder mask to provide component protection while maintaining acceptable RF performance for the target frequency range.

 

Q: What's the significance of 92 vias with a 2-net design?
A: The high via count represents extensive grounding and shielding structures, creating a well-defined ground plane for the RF signals.

 

Q: Is TMM4 suitable for wire-bonding?
A: Yes. The thermoset resin allows for reliable wire-bonding, making it valuable for chip testers and specialized RF assemblies.

 

Q: How does TMM4 handle high temperatures?
A: A decomposition temperature of 425°C (TGA) is withstood, and the CTE is matched to copper for reliable plated through-holes through thermal cycling.

 

Final Thoughts

Rogers TMM4 delivers thermoset stability, reliable wire-bonding, and low loss in a material that can be specified in unusually thick cores. When your RF design requires both mechanical robustness and consistent electrical performance, this material delivers.

 

Got a thick-substrate or high-reliability RF project in mind? I'd love to hear about it.

 

Póngase en contacto con nosotros

Incorpore su mensaje

sales30@bichengpcb.com
+8618277967574
BTL_SallyMao
.cid.455f73688e64dff1
431959212
86-755-27374847